Kingfisher 20 Technical

Length O/A 207" (6170)                                                         
Length W/L 186" (5630)                                                          
Beam 6'11" (2108)
Draft 24" (711)
Displacement 2600 lbs (1176) 
T.M. 3 tons
Reg. 3.2 tons
Rating 107
O/A height from ground 66" (1980)
O/A height on trailer 79" (2360)
Mast Height from step 24 (7315)
Length of boom 102" (3100)
Width of deck 6" (160)

Sail Areas Main 110sq ft (10.2), Jib 67sq ft (6.23), Genoa 125sq ft (11.6),Storm jib 25sq ft (2.32)

Rigging Standing rigging 3/16 in (5) diameter vinyl covered plough steel. Fastenings 3- inch (6.3) diameter stainless steel bolts. Halliards inch (20) diameter pre-stretched Terylene. Sheets 1 1/8 (29) diameter plaited Terylene.

Interior Main Cabin: Headroom 46" (1370). Sitting Headroom 34" (1016). Bunk Length 7 (2130).
Main Cabin: shelf area 16sq ft (1.5). Locker Volume 16cu ft (.45). Sink Size 15x11x6 (380x280x150).
Fore Cabin: Bunk Length 63" (1910). Sitting Headroom 27" (790). Locker Volume 16cu ft (.45).
Hanging Locker and Toilet Compartment each volume 13cu ft (.37). Height 52" (1320). Width 23" (580).

Exterior Cockpit: Overall Length 410" (1470). Width 4 (1220). Depth 22" (560). Height of bridge deck 22" (560). Seat Height 14" (355). Well Size 2"x 36" (600x1066). Volume of lockers under cockpit seats 18cu ft (.51). Petrol tank locker volume 5cu ft (.14). Outboard Motor Mounting. Light alloy on stainless steel pivots. Locks stainless steel.

Bilge keels hydrofoil section. Cast Iron. Weight 550lbs (250) each. Keel attachment inch (12.7) diameter stainless steel studs through steel plates moulded into hull. 16 studs per keel. Rudder blade galvanised steel plate. Cheeks 2.1" (25) Marine plywood. Windows 3/16 inch (5) Perspex set in non-oxidising rubber. Deck fittings gun metal. Mast step light alloy. Bottle screws superston. Suitable engine, Johnson 3hp. Johnson 5 hp. Johnson 6hp.

Technical Drawing
K20 tech Bristows.JPG (21680 bytes)